Why Standard Racking Struggles With Long Loads
Standard pallet racking works well when your inventory sits on a pallet. Lumber, pipe, bar stock, and sheet goods do not. A 20 foot length of steel pipe will not sit on a pallet beam, and a front upright gets in the way every time a forklift tries to load it.
Cantilever pallet racking fixes that issue. It uses vertical columns with horizontal arms that reach out from the front, so nothing blocks the face of the rack. You load long material straight onto the arms from the open side of it.
I have spent 15 years in this industry, and I wrote this guide to answer the questions buyers ask us most. I will walk you through how the cantilever system works, how to choose between multiple options, and what to ask before you spend money. It is written for lumber yards, pipe and bar stock distributors, window and door manufacturers, and anyone else who stores long or bulky material.
How Cantilever Racking Is Built
Every cantilever system has four main parts. Knowing them helps you read a quote and compare multiple suppliers.
- Columns: The vertical posts that carry the load down to the floor
- Bases: The floor-level pieces that keep the columns stable and spread the weight evenly across the slab
- Arms: The horizontal supports that hold your material, set at the heights you choose
- Bracing: The cross pieces that tie the columns together and stop the structure from swaying
Arms are attached to the columns, so you can move them up or down easily when your product mix changes.
Who Uses It and Why
Different industries choose cantilever racking for different reasons.
- Lumber yards: Bundles of different lengths sit side by side without being cut or stacked unsafely
- Pipe and bar stock distributors: Steel, copper, and PVC lengths stay sorted by size and grade, with easy access for picking
- Window and door manufacturers: Long extrusions and wood frame stock stay straight and protected from damage
- Sheet goods suppliers: Plywood, panels, and sheet metal rest flat on decked arms instead of leaning against a wall
If most of your product is shorter than a pallet, standard selective racking is probably the better fit. Cantilever racking earns its place when your item is lengthy.
Single Sided or Double Sided
The first big decision is how many sides your rack needs to load from.
Single sided cantilever racking
Single sided racking has arms on one side only. It suits racks that sit against a wall, or spaces where you only load and pick from single direction. It also works well in smaller yards and narrow facilities. The tradeoff is that it holds less material per column than a double sided cantilever setup.
Double sided cantilever racking
Double sided racking puts arms on both sides of a center column. You can load from two aisles, which stores more material in the same footprint. It is a usual choice for open floor plans and larger facilities. One thing needs care here. Heavy material on one side with nothing on the other puts uneven stress on the column. Follow the manufacturer’s loading guidance and keep both sides as balanced as you can.
Indoor vs Outdoor Cantilever Racking
Many lumber and pipe businesses store at least some stock outside. Cantilever racking stored outside faces rain, snow, road salt, and big temperature swings, so it needs a different build than an indoor system.
- Finish: Cantilever racking systems used in outdoor settings use a galvanized finish to resist rust, while indoor systems often use paint or powder coating
- Weather loads: Snow and wind add force on top of your stored material, so the design has to account for your local conditions
- Foundation: Outdoor pads need to handle freeze and thaw cycles and drain water away from the base
- Covered or open: A roof over the racking cuts rust and protects stock, but it also changes the engineering and needs proper review
If you plan an outdoor install, ask your racking supplier for engineered drawings and confirm who checks the foundation. A covered structure can also need a building permit, so raise that early instead of after you place the order.
How Arm Capacity Really Works
Arm capacity confuses a lot of buyers. One number on a spec sheet rarely tells the whole story, because the real limit depends on several factors working together.
- Arm length: Longer arms carry less weight than shorter arms of the same type
- Load position: Material resting close to the column puts less strain on the arm than material near the tip
- Column capacity: The column has its own limit, which can be lower than the combined arm capacity
- Arm height: Capacity tables often change by arm level, so check the table for the exact setup you plan to use
Ask for the capacity table for the exact configuration of your system, then compare it against your heaviest bundle, not your average one. If you are close to the limit, size up. It costs far less than replacing a bent arm or column later.
Column Spacing and Layout
Column spacing decides how many arms support each load and how long your material can be. Your longest piece should rest on more than one set of arms, and heavy loads need that support spread out instead of concentrated in one spot.
- Measure your longest and heaviest material first, then plan the spacing around those two numbers
- Leave enough clearance for your lift equipment to enter and leave the aisle safely
- Set arm heights to suit the product you move most, so common picks happen at easy reach
- Leave room to add columns later instead of packing the layout tight on day one
Match the Rack to Your Material
Small details separate a rack that works from one that causes damage and wasted time.
- Lumber: Space the arms to match bundle length, and use dunnage between layers so air can move through the stack
- Pipe and bar stock: Choose arms with an upward tilt or end stops so round material does not roll off and fall
- Sheet goods: Add decking across the arms so sheets lie flat and do not sag between supports
- Window and door profiles: Pad the arm surfaces so extrusions do not scratch, and sort by length to avoid bending
Safety and Inspection
Cantilever racking carries heavy, awkward loads, so regular checks matter a lot. In Canada, racking design is guided by CSA A344 and your provincial workplace safety rules. Ask your racking supplier which standards apply to your system, and ask for the engineered drawings.
- Arms: Look for bends, cracks, and loose pins
- Columns: Check for dents, bowing, and base damage
- Bases and anchors: Look for loose bolts and cracked concrete
- Labels: Confirm capacity labels are visible and correct
Many checks in our pallet rack inspection checklist apply to cantilever systems too. For a new install, our Pre-Start Safety Inspection confirms the system is ready for use before you load it.
Questions to Ask Before You Buy
Use this list with any supplier, including us.
- What is the capacity at each arm level for my exact setup?
- Can you supply engineered drawings and load tables?
- What finish do you use, and is it suited to outdoor use?
- What lift equipment does this layout assume?
- Who installs it, and is a safety inspection included?
- How easy is it to add columns or move arms later?
Looking for a Supplier for Cantilever Racking?
We are the official distributor of Cogan products, including Cogan cantilever racking for lumber, pipe, and sheet goods. We supply and install across Toronto, Mississauga, Brampton, Burlington, Vaughan, and throughout Canada.
Send us your material lengths, weights, and floor plan, and we will recommend an optimal layout that fits. You can view our layout design page for the idea of warehouse setups or contact us directly. Our team is happy to talk through your project.
FREQUENTLY ASKED QUESTIONS
What are the key differences between cantilever racks and pallet racks?
Pallet racks hold palletized loads between front and rear uprights. Cantilever racks use arms with an open front, so long loads that don’t fit on a pallet slide on without obstruction.
How do you install a cantilever rack?
Follow the engineered drawings. Anchor the bases to the slab, set the columns, add the bracing and arms to the manufacturer’s specifications, and then have the system inspected before loading it.
What is the weight capacity of a cantilever rack?
No single number applies. Capacity depends on arm length, where the load sits on the arm, the column limit, and arm height. Ask for the capacity table for your exact setup.
